基于RTKLIB的低成本高精度GNSS静态测量系统     

董景利 《测绘通报》2020,(4):157-160

随着科学技术的发展，测量工具和测量手段也发生了变化，其中测量型GNSS呈现价格降低、体积缩小的趋势。目前市场上一整套商用GNSS测量系统的价格从几万到几十万不等，且由于地面基站和移动站体积大、携带不方便等原因，使得商用GNSS测量系统的使用人群仅限于部分专业测量人员，难以在大众市场普及。当今众多领域如无人机、机器制导、精密农业等对高精度定位需求的增加，又促使GNSS测量系统向低成本、高精度、小型化、轻型化发展。本文对U-BLOX的NEO-M8P低成本OEM型GNSS接收机进行50 km基线下的静态观测，基于RTKLIB的测试结果和精度分析表明，低成本GNSS测量系统能够达到厘米级定位精度，能够满足测量工作和GIS应用的需求。试验证明，使用此低成本测量系统能降低测量任务的经济成本，是测量级GNSS接收机中经济适用的选择。  相似文献   

Coupled analysis for response and instability of sloping seabed under wave action     

《Applied Ocean Research》2019

Wave-induced instability of seabed may cause damage to coastal and offshore structures. This issue has been investigated mostly for mildly sloping ($<5^{°}$) seabed considering uncoupled or one-way coupled response of wave and seabed interaction. However, some of the marine structures are founded on seabed with steeper slopes. In this study, the wave-induced response and instability of sloping seabed are evaluated using a coupled finite element model. The interaction between fluid and porous seabed accounting for the effect of fluid motion on the seabed response, and conversely the effect of seabed response on the fluid motion (but not on the surface wave profile) is considered. The results indicate that the system response (fluid pressure, stresses, etc.) and the extent of instantaneously liquefied zone within the sloping seabed with significant steepness are lesser than those for horizontal seabed. Moreover, for typical sediment and wave characteristics, for the flat seabed, the response obtained from fully coupled analysis is not significantly different from those obtained by uncoupled analysis. For the sloping bed, such difference is slightly greater as compared to that for the flat bed.  相似文献   

Talus slope geomorphology investigated at multiple time scales from high-resolution topographic surveys and historical aerial photographs (Sanetsch Pass,Switzerland)     

Hanne Hendrickx  Lars De Sloover  Cornelis Stal  Reynald Delaloye  Jan Nyssen  Amaury Frankl 《地球表面变化过程与地形》2020,45(14):3653-3669

Talus slopes are common places for debris storage in high-mountain environments and form an important step in the alpine sediment cascade. To understand slope instabilities and sediment transfers, detailed investigations of talus slope geomorphology are needed. Therefore, this study presents a detailed analysis of a talus slope on Col du Sanetsch (Swiss Alps), which is investigated at multiple time scales using high-resolution topographic (HRT) surveys and historical aerial photographs. HRT surveys were collected during three consecutive summers (2017–2019), using uncrewed aerial vehicle (UAV) and terrestrial laser scanning (TLS) measurements. To date, very few studies exist that use HRT methods on talus slopes, especially to the extent of our study area (2 km²). Data acquisition from ground control and in situ field observations is challenging on a talus slope due to the steep terrain (30–37°) and high surface roughness. This results in a poor spatial distribution of ground control points (GCPs), causing unwanted deformation of up to 2 m in the gathered UAV-derived HRT data. The co-alignment of UAV imagery from different survey dates improved this deformation significantly, as validated by the TLS data. Sediment transfer is dominated by small-scale but widespread snow push processes. Pre-existing debris flow channels are prone to erosion and redeposition of material within the channel. A debris flow event of high magnitude occurred in the summer of 2019, as a result of several convective thunderstorms. While low-magnitude (<5,000 m³) debris flow events are frequent throughout the historical record with a return period of 10–20 years, this 2019 event exceeded all historical debris flow events since 1946 in both extent and volume. Future climate predictions show an increase of such intense precipitation events in the region, potentially altering the frequency of debris flows in the study area and changing the dominant geomorphic process which are active on such talus slopes. © 2020 John Wiley & Sons, Ltd.  相似文献   

煤体静载破坏微震、电磁辐射及裂纹扩展特征研究     

艾迪昊  李成武  赵越超  李光耀 《岩土力学》2020,41(6):2043-2051

为研究型煤在单轴压缩破裂过程中产生的微震、电磁辐射信号与裂纹演化特征的对应关系，利用自主设计的低噪声静态加载试验系统，对0～0.25、0.25～0.5、0.5～1.0、1～2 mm共4种不同粒度的型煤进行了单轴压缩破坏试验，同步采集了煤样破坏过程中的微震、电磁辐射信号及破坏视频图像，提出了一种煤体裂纹快速提取方法并计算了型煤裂纹面积的变化规律。研究结果表明：型煤在单轴压缩过程中产生的微震、电磁辐射信号及裂纹面积在时域上具有良好的同步性。型煤破坏过程中裂纹面积随时间变化曲线可分为4个阶段。第1阶段为压实阶段，煤样所受应力值较小，其表面的裂纹面积以极为缓慢的速率增加。第2阶段为初始破裂阶段，随着应力的增加和内部弹性势能的积聚，型煤表面裂纹面积的增加速率较压实阶段有明显提高，伴随产生许多细小裂纹。第3阶段为加速破裂阶段，随着应力继续增加以及材料内部积聚弹性能的释放，试样变形过程加速，导致裂纹面积增速进一步增大。第4阶段为卸压阶段，试样的裂纹面积达到最大值，承载能力急剧降低，发生失稳破坏。  相似文献   

Critical Top Tension for Static Equilibrium Configuration of A Steel Catenary Riser     

Chainarong ATHISAKUL  Karun KLAYCHAM  Somchai CHUCHEEPSAKUL 《中国海洋工程》2014,(6):829-842

This paper aims to present the critical top tension for static equilibrium configurations of a steel catenary riser（SCR） by using the finite element method. The critical top tension is the minimum top tension that can maintain the equilibrium of the SCR. If the top tension is smaller than the critical value, the equilibrium of the SCR does not exist. If the top tension is larger than the critical value, there are two possible equilibrium configurations. These two configurations exhibit the nonlinear large displacement. The configuration with the smaller displacement is stable, while the one with larger displacement is unstable. The numerical results show that the increases in the riser＇s vertical distances, horizontal offsets, riser＇s weights, internal flow velocities, and current velocities increase the critical top tensions of the SCR. In addition, the parametric studies are also performed in order to investigate the limit states for the analysis and design of the SCR.  相似文献   

A multiscale work-analysis approach for geotechnical structures     

Hao Xiong  Zhen-Yu Yin  François Nicot 《国际地质力学数值与分析法杂志》2019,43(6):1230-1250

This paper presents a second-order work analysis in application to geotechnical problems by using a novel effective multiscale approach. To abandon complicated equations involved in conventional phenomenological models, this multiscale approach employs a micromechanically-based formulation, in which only four parameters are involved. The multiscale approach makes it possible a coupling of the finite element method (FEM) and the micromechanically-based model. The FEM is used to solve the boundary value problem (BVP) while the micromechanically-based model is utilized at the Gauss point of the FEM. Then, the multiscale approach is used to simulate a three-dimensional triaxial test and a plain-strain footing. On the basis of the simulations, material instabilities are analyzed at both mesoscale and global scale. The second-order work criterion is then used to analyze the numerical results. It opens a road to interpret and understand the micromechanisms hiding behind the occurrence of failure in geotechnical issues.  相似文献   

大功率高频电波加热电离层的非线性物理过程          下载免费PDF全文

周晨  王翔  刘默然  倪彬彬  赵正予 《地球物理学报》2018,61(11):4323-4336

地基大功率电波加热电离层是通过地基大功率短波发射机向电离层发射无线电波，通过波-粒和波-波的相互作用将无线电波的能量注入电离层.通过这种有目的可操控的方式改变电离层电子密度和温度的分布，可以深入研究电离层中等离子体能量和物质的非线性演化过程，特别是电离层电子的非平衡态分布和加速问题.本文通过对电离层加热中几个比较重要物理过程的评述，对过去20年来我国研究学者在这一研究方向上取得的重要进展进行了介绍.  相似文献   

The Roles of Barotropic Instability and the Beta Effect in the Eyewall Evolution of Tropical Cyclones     

Jie JIANG  Yuqing WANG 《大气科学进展》2022,39(11):1800-1815

Diabatic heating by convection in the eyewall often produces an annular region of high potential vorticity (PV) around the relatively low PV eye in a strong tropical cyclone (TC). Such a PV ring is barotropically unstable and can encourage the exponential growth of PV waves. In this study, such instability and the subsequent nonlinear evolution of three TC-like vortices having PV rings with different degrees of hollowness on an f-plane are first examined using an unforced, inviscid shallow-water-equation model. Results show that the simulated eyewalls evolve similarly to those in the nondivergent barotropic model. It is also found that the polygonal eyewall structure can be decomposed into vortex Rossby waves (VRWs) of different wavenumbers with different amplitudes, allowing for wave-wave interactions to produce complicated behaviors of mesovortices in the TC eyewall. The same set of PV rings has been examined on a beta-plane. Although the beta effect has been rendered unimportant to the eyewall evolution due to the relatively small scale of the inner-core circulation, this study shows that the beta effect may erode the coherent structure of mesovortices in the eyewall of an initially hollow PV-ring vortex. Mesovortices modeled on the beta-plane with a greater beta parameter tend to experience an earlier breakdown and enhanced radial gradients of the basic-state (azimuthally mean) angular velocity, followed by wave-wave, wave-flow interactions, leading to earlier merger and axisymmetrization processes. This result implies that the beta effect could be one of the forcings that shorten the lifetime of quasi-steady mesovortices in the eyewall of real TCs.  相似文献   

一次自上向下发展的高原涡的多尺度动力学分析     

容逸能  马继望  李瑶婷  梁湘三 《气象科学进展》2021,(1)

高原涡作为经常给我国带来暴雨等灾害的天气系统,其形成一般认为是通过感热和潜热自下而上激发的,然而,2013年5月下旬发生的一次引发其下游灾害性强降水的高原涡却是由对流层高层天气尺度低涡诱发的。为此,基于新发展的多尺度子空间变换和多尺度能量涡度方法以及ERA5再分析资料对其动力学过程进行了详尽的探讨,先将原始场重构到三个尺度子空间,即背景环流尺度子空间、天气尺度子空间和高频尺度子空间,重构场上首次显示此次过程生成于青藏高原西北侧,其成因为对流层高层基本气流尺度向天气尺度的跨尺度动能正则传输,即正压失稳,并且表现为从高层向下。在发展阶段,其能量最终来源为基本气流向天气尺度的有效位能传输和非绝热加热,然而这些过程只发生于涡旋低层的西侧。进一步分析发现,天气尺度内存在一个能量再分配“路径”:首先,低层西侧获得的有效位能转换为动能,西侧垂直的气压梯度力做功将低层获得动能向高层分配;在高层,水平的气压梯度力做功进而将西侧获得的动能向东侧分配;东侧垂直的气压梯度力做功再将动能向低层分配;至此,低层西侧获得的能量被分配到整个涡旋空间中,使得涡旋能够均匀发展。  相似文献   

坑式钢管静压桩在地基加固中的应用     

周军怀  李向阳  柴卓 《探矿工程》2018,45(11):56-59

坑式钢管静压桩是解决既有建筑物因软弱土层地基产生沉降变形的一种技术方法。针对山西北化关铝化工有限公司质检楼地基沉降变形及工程地质条件,提出了采用坑式钢管静压桩进行加固处理的设计方案,介绍了坑式钢管静压桩施工方案和施工流程及注意事项;总结了施工过程中遇到的问题,并对施工后的监测数据进行了分析。结果表明,坑式钢管静压桩施工对软弱地基加固效果良好,可成功地解决软弱土层产生的地基沉降开裂问题。  相似文献